VHF R5 - Deactivating and Activating the Ionizer

6.9 Deactivating and activating the
ionizer
The ionizer considerably reduces the required cleaning
effort after dry machining. However, using the ionizer
also contributes to the overall compressed air
consumption of the machine.
You can decide whether you want to activate or deac-
tivate the ionizer via DENTALCNC. This is a general
setting that will affect all jobs that you machine.
To deactivate or activate the ionizer, do the fol-
lowing:
a. Start DENTALCNC.
a. Open the DENTALCNC Application settings with
the following icon in the main iconbar:
a. Open the General settings with the following
icon in the local iconbar:
b. Deactivate or activate the Ionizer activated option.
R5 – Operation: Preparing jobs
EN 45
Original Operating Instructions:R5
Version: 12/16/2021