iMS3D – Indoor Mobile Scanning System
Operating Guide. © Viametris SAS.
iMS3D – Operating Guide Document v2.12 17
Figure 11:overall recommendations for some real life situations.
8.2.1 GENERAL ADVISES ON SCOUT ROLE AND POSITIONING;
Avoid to remain in front of the cart or by the cart side. (see the 270° scan angle in Figures 12
& 13)
Facilitate the doors/light handling in front of the cart trajectory (enough in advance not to
interfere with measurement).
To avoid the scout to be caught within the scan range, it is recommended that the scout
prepare the room in advance and not “just in front” of the cart
Warn staff and visitors of the presence of the scanning operations, but they should not change
their trajectory if they come across the cart.
In case the Scout is “caught” in the scan range, it is recommended that he remains still, till he
finds himself behind the cart and then can resume his activities.
Kindly explains to site guide or demo attendees to remain behind the cart as their permanent
presence by the side of the cart would create a ghost wall.
daylight on
without
distinctive
daylight with
Ceilings
with
distinctive
daylight with
To Next Page
Loading...