iMS3D – Indoor Mobile Scanning System
Operating Guide. © Viametris SAS.
iMS3D – Operating Guide Document v2.12 2
CONTENT
1 INTRODUCTION & PRELIMINARY 4
1.1 NORMAL CONDITIONS 4
1.2 COMPONENT LISTS 4
2 MOUNT YOUR SYSTEM 5
3 START SCANNING 9
4 DATA TRANSFER 12
5 RECHARGING THE TABLET ON BOARD 13
6 SWITCH-OFF AND BOX STORING 13
7 SYSTEM VEC FILE 16
7.1 MEANING 16
7.2 HOW TO UPDATE IT 16
8 USAGE RECOMMENDATIONS 16
8.1 SITE PREPARATION 16
8.2 OPERATIONAL RECOMMENDATIONS 16
8.2.1 GENERAL ADVISES ON SCOUT ROLE AND POSITIONING; 17
8.2.2 LIGHT CONDITIONS: 18
8.2.3 ARCHITECTURAL CONDITIONS: 20
8.2.4 DOORS: HOW TO HANDLE “OPEN/CLOSE” 22
8.2.5 HOW TO HANDLE BUSY ROOMS (FURNITURE/STORAGE) 23
8.2.6 RAMP UP/DOWN 23
8.2.7 HOW TO MOVE THE CART AND TRAJECTORY. 25
8.2.8 TRAFFIC ON THE FLOOR. 25
8.2.9 STAIRWAYS RELATED RECOMMENDATIONS 26
8.2.10 CELLARS AND MANSARD ROOFED ATTICS: 26
8.2.11 USAGE OF VIAMETRIS TARGETS 27
8.2.12 USAGE OF PAUSE VS STOP (WHEN TO DO, PRECAUTIONS TO TAKE) 27
9 SAFETY RECOMMENDATIONS: 28
10 TRADEMARKS 28
11 SITE CHECK LIST 29
To Next Page
Loading...