Viasensor G100 Series - Panel Key Functions

OMG100N1.17 G100 Range
Page 12 LANDTEC North America, Inc., DBA
VIASENSOR
4.2 Panel Key Functions
Front Panel:
Back Panel:
K
Moisture Removal Tube
Removes the moisture from the sample gas.
L
Serial Number
Unique Identification for the instrument.
Verification of the serial number will be required if
Technical Support assistance is needed.
M
Instrument Stand
Instrument stand.
 Note: Do NOT attempt to remove the cover off the back of the analyzer which houses
the moisture removal tube.
Do NOT cover the moisture removal tube with your hand when holding the
analyzer to take readings.
Key
Description
Function
A
Main Read Screen
Start and end screen when using the instrument.
B
Soft Keys
The function of the three ‘soft-keys’ on the front of
the instrument panel are determined by menu
options taken. Functions vary from screen to
screen.
C
On/Off Key
Press the ‘On/Off’ key briefly to switch the
instrument on and off.
D
Pump Key
Press the ‘Pump’ key to start or stop the pump.
E
Scroll Left Key
Also ‘Key 4’. Enables the operator to scroll left to
display more information.
F
Scroll Down Key
Also ‘Key 8’. Enables the operator to scroll down
to display more information.
G
Menu Key
Press the ‘Menu’ key to go to the ‘Main’ menu.
Enables the operator to pre-set values and
settings. Select options from the ‘Main’ menu to
also view data and readings stored or held.
H
Enter Key
The ‘Enter’ key accepts/confirms choices made by
the operator to various functions and operations.
Also, required to confirm numeric data entry.
I
Scroll Up Key
Also ‘Key 2’. Press scroll up to view further
information on the instrument read screen.
J
Scroll Right Key
Also ‘Key 6’. Press scroll right to view further
information on the instrument read screen.