Viasensor G100 Series - Information and Utilities; Instrument Information Access; Utilities Menu Navigation; Time & Date Settings

OMG100N1.17 G100 Range
Page 18 LANDTEC North America, Inc., DBA
VIASENSOR
5.9.1 Information
The ‘Information’ option enables the operator to display information such as instrument
type, serial number, current software version, service due date and the dates of the last
factory and user calibrations.
1) From the ‘Main Read Screen’ press the ‘Menu’ key on the instrument panel.
2) Press ‘Key 1’ to display general information about the instrument.
Information Screen
5.9.2 Utilities
The ‘Utilities’ option enables the operator to configure instrument settings prior to taking
readings.
1) From the ‘Main Read Screen’ press the ‘Menu’ key on the instrument panel.
2) Press ‘Key 2’ to display the ‘Utilities’ menu and the following screen is displayed:
Utilities Menu
5.9.2.1 Time & Date
The ‘Time and Date’ option enables the operator to check or set the instrument’s
internal clock. The current time/date are appended to every stored reading.
1) From the ‘Main Read Screen’ press the ‘Menu’ key on the instrument panel.
2) Press ‘Key 2’ to display the ‘Utilities’ menu.
3) Press ‘Key 1 – Time & Date’ and the ‘Set Time & Date’ menu is displayed: