Viasensor G100 Series - Instrument Connection Points

G100 Range OMG100N1.17
 Copyright 2009 LANDTEC North America, Inc., DBA VIASENSOR Page 13
4.3 Instrument Connection Points
Top View: Side View:
N.B. Depending on the configuration purchased, certain connectors may not be
present.
 Note: Temperature connectors are fitted with snap rivets to prevent dust ingress,
remove before use. Grip back cap and pull upwards to release. Refit when not
in use.
A
Top View:
Temperature 1
Temperature 1 connector measures
differential temperature – incubator and
ambient temperatures.
B
Temperature 2
Temperature 2 connector measures
differential temperature – incubator and
ambient temperatures.
C
Humidity Probe (Optional)
Humidity probe attachment point.
D
Gas Outlet
Gas outlet port used to exhaust the gas.
E
Gas Inlet
Gas inlet point used to attach the sample
tube and filter in order to take the gas
reading.
F
Side View:
USB Cable Attachment Point
Used to connect the analyzer to a PC via a
USB cable to download data.
G
Battery Charger connection
Used to attach the battery charger to the
analyzer for charging.
5V ± 0.5V(max 1000mA)
+-
5V ± 0.5V(max 1000mA)
+- +-