Viasensor G100 Series - Status Icons and Data Entry; Instrument Status Icons; Entering Data

OMG100N1.17 G100 Range
Page 16 LANDTEC North America, Inc., DBA
VIASENSOR
5.4 Instrument Status Icons
The following icons may be displayed on the instrument read screens:
Icon
Description
Battery charge state
(flashing)
< 1 hour remaining
(flashing)
Battery charging
Charged
Pump running
(flashing)
Pump stalled (Backlight turns red)
Alarm set
(flashing)
Alarm active (Backlight turns red)
USB connected to PC (flickers when transferring data)
Logging mode active (flashes when memory nearly full)
Temperature probe(s) connected
Humidity probe connected
(flashing)
Service due (every 12 months)
Service overdue
Fault/repair
Waiting
 Note: A red backlight is displayed if the pump is stalled or the alarm is activated. For
further information, please refer to ‘section 5.9.2.3 Alarms’ or ‘section 5.9.2.5
Flow Fail’.
5.5 Entering Data
During normal operation the user may be prompted to enter data or information via the
keypad, i.e. entering an ID code or setting an alarm level.
When entering data into the instrument all fields are fixed format and are populated from
the right. For example, to enter a new time 09:25:00 the user would type in 092500 using
the numeric keypad in the following sequence:-
* : : 0
* : :09
* : 0:92
* :09:25