Viatom Checkme Pro - Product Introduction; Intended Use of Checkme Pro; About the Checkme Pro Device

3
measurements and provide them to your doctor if required.
 This product doesn’t provide on-device data backup function.
1. Introduction
1.1 Intended Use
The Checkme Pro Health Monitor is intended to be used for measuring,
displaying, reviewing and storing of ECG (adults only), oxygen saturation
and pulse rate (adults only for continuous data collection and recording,
adults and pediatrics for spot checking) and temperature in the home or
in healthcare facilities.
This device is not intended to substitute for a hospital diagnostic ECG
device and also not to be used on patients with implanted cardiac devices,
such as pacemakers and/or implanted cardio-defibrillators (ICDs).
1.2 About Checkme
1. Touch Screen
Use the pad of your finger to tap or swipe on the touch screen. Do
not use your fingernail or any other object to tap the screen.
2. Infrared temperature sensor
3. Internal SpO2 sensor
4. LED indicator
 Off: the monitor is turned off or working in Standby Mode;
 Green: the monitor is turned on, and working normally; or when
5
6
7
2
1
3
4