Viavi SmartClass OLP-87 - Deleting a Project; Activating a Project

OLP-87/OLP-87P 41
DELETING A PROJECT
5 MANAGING PROJECTS
The changes are immediately effective.
3. Press the
[F] button to close the edit menu.
Deleting a project
1. Select the project you wish to delete.
2. Press the
[A] key and tap [Remove].
3. Tap [Yes] to permanently delete the project.
The project is deleted and removed from the list.
Activating a project
To assign measurements to a project, the project must be
activated. There can always be only one active project.
1. Select the project you wish to activate.
2. Tap t h e button.
– or –
Press the
[A] key and tap [Set Active].
Allow a few seconds until the label ACTIVE is displayed at the
selected project.
NOTE: Savings of measurement results are assigned to the selected
project.