OLP-87/OLP-87P 71
SAVING RESULTS
10 DATA MANAGEMENT
10 DATA MANAGEMENT
NOTE: Results are always stored under the currently selected (active)
project. Thus, to display stored results the desired project must
be set to active first (see“Managing projects” on page 39).
Saving results
Saving results is explained in the descriptions of each
application.
Data management of PONmeter, XGPON and
Broadband tests
Kann hier die Data Management Beschreibung zu Powermeter
tests übernommen werden?
Sind der Screen zum stored data-overview und die
Auswahlmöglichkeiten (Tabelle) für PONmeter, XGPON und
Broadband dieselben?
Recalling stored test results
Stored test results are displayed directly from the menu in the
chosen application.
I The instrument is in the chosen application mode.
1. Press the
[A] key
2. Tap t h e [More] button.
3. Tap t h e [Measurement Data] button.
The list of stored test results is displayed.
Fig. 27 Measurement data overview
Grafik korrekt für PONme-
ter, XGPON und Broad-
band Operation?
To Next Page
Loading...
