2
Getting Started
Components of the M Series System
Check the contents of the packages against Figure 1 to verify that you have
received all of the components. Contact the factory if anything is missing
or damaged. (NOTE: damaged shipments must remain with the original
packaging for freight company inspection.)
Components include:
•Pump
ModelM6: ProductnumberCP2-4841-D
ModelM50: ProductnumberCP3-8182-D
•Motorassembly
ModelM6: ProductnumberCP-DSM
ModelM50: ProductnumberCP-DSM2
•MicroLYNXcontroller:ProductnumberCP-CM1-P
•Controllermotorpowercablewith5pinDINconnector
•ControllerRS-232ribboncable
•24VDCpowersupply
•110/220VACcableforpowersupply
•Fittings(2)
ModelM6: ProductnumbersZN1FPK(nut)andZGF1PK(ferrule)
ModelM50: ProductnumbersCFL-2BK-S(nut)and
CFL-CB2KF-S(bushing)
•M6-LHSsoftwareCD
•Manual
•Qualitycontrolcerticate
PC System Requirements
PentiumPC100MHzorhigher,runningWindows95,98,ME,NT,2000,
orXP.Thepumpcontrollerrequiresadedicatedserialport.Ifyourpump
systemincludesavalvewithelectricactuator,anadditionalserialportis
required.Alternately,aUSBtoRS-232adapter(notsupplied)canbeused
foroneorbothconnections.Theadaptermaybepurchasedfromany
computer supply outlet.