CLUTCH, PRIMARY, & SHIFT LINKAGE
9.30
© Copyright 2012 Polaris Sales Inc.
9924047 - 2012-2013
VICTORY Cross Roads / Cross Country Service Manual
11. Install idler gear and shaft (C).
12. Install starter clutch and gear (page 9.30).
Starter Gear / Starter Clutch Installation
1. Install one-way clutch with raised edge (A) inward
(toward primary gear).
2. Install starter gear (B). When properly installed, the
starter gear should rotate smoothly in a clockwise
direction and lock to the primary gear when you
attempt to rotate it counterclockwise.
3. Install washer (C).
4. Install retaining ring (D).
5. Install rotor (page 9.25).
6. Install primary cover (page 9.12).
7. Check engine oil and fill to proper level.
To Next Page