Need help?Do you have a question about the Victron energy Blue Smart IP65 Charger 12/4 and is the answer not in the manual?
General| Input Voltage | 100-240 VAC |
|---|---|
| Output Current | 4 A |
| Battery Capacity | up to 100 Ah |
| Efficiency | 85% |
| Charging Stages | Bulk, Absorption, Float |
| Bluetooth | Yes |
| Output Voltage | 12V |
| Battery Type | Lead-acid, Lithium |
| Protection | Over-temperature, reverse polarity, short circuit |
Explanation of the charger's intelligent multi-stage process for optimal battery charging.
How the charger adjusts voltage based on ambient temperature for battery health.
Conditions and steps that trigger the start of a new battery charging sequence.
Method for calculating the expected time to fully charge a battery.
Instructions on selecting charge modes and settings directly on the charger.
How to use the mobile app for setup, monitoring, and configuration.
Information on establishing and managing Bluetooth connectivity for remote control.
Procedure to restore the charger to its factory default settings.
Displays real-time battery voltage, charge current, and active charge stage.
Visual representation of charge stages, battery voltage, and current over time.
Access to historical usage data and statistics for past charge cycles.
How to use the charger as a stable DC power source.
Fine-tuning charge parameters like voltage, current, and compensation for specific needs.
Access to specialized configuration options for advanced users.
To Next Page