1. Safety instructions
General
• Review the included documentation for instructions before using this product.
• This product has been tested in accordance with international standards. Only use this product for the intended purpose or
application.
• Never use the product in locations with a gas or dust explosion danger.
Installation
• Always refer to the installation section in this manual before applying power to the equipment.
• Ensure that the environmental conditions are suitable for the operation of this product. Never operate the product in the rain or
a dusty environment.
Transport and storage
• When storing or transporting this product, ensure all leads are disconnected.
• There is no liability for transport damage in non-original packaging.
• Store the product in a dry location.
• Storage temperature must be between -20°C and 60°C.
Digital Multi Control
Page 1 Safety instructions
To Next Page
Loading...
Need help?
General
