Videx 4000 Series Installation Instructions

66252090 - V1.2 - 15/03/24
- 2 -
4000 Series
Art.4312 - Installation instructions
AVAILABLE VERSIONS
AUDIO/VIDEO
Art.4312V
For 4000Series
modular system, ush
or surface mounting.
Art.4312RV
For 4000Series
modular system, ush
or surface mounting,
with repertory name.
Art.4312V/F
Flush version.
Art.4312RV/F
Flush version with
repertory name.
AUDIO ONLY
Art.4312
For 4000Series
modular system, ush
or surface mounting,
with repertory name.
Art.4312R
For 4000Series
modular system, ush
or surface mounting,
with repertory name.
OPERATION
STANDBY MODE
The display alternates between HOME1 page and logo (if enabled - see Home 2 on
page 8).
HOME1 (shown in Fig. 3)is composed by 4 lines:
• rst line contains date, time and symbol (if enabled - see NFC on page 12). Date
and time have the format specied by date format and clock format (see pag. 8)
• second, third and fourth lines are edited from Home parameters menu (see Line 1,
2, 3 on page 8)
The switching time between HOME1 and logo is specied by Switch parameter on
Home parameters menu (see pag. 8).
Hold the 0 pressed to enter the coded access mode.
Press or (only for 15 button panels) to scroll through the users. (see Scrolling users on page 3).
Use the numeric keypad followed by to call an apartment (see Flat on page 7).
Passing a valid and enabled card/fob in front of
symbol will open the door.
10:30 29/12/2015
VIDEX ELECTR.
FLAT 3
WELCOME
Fig. 3
HOW TO INSERT A CODE
From standby mode, holding pressed 0 will enter the code mode (see Fig. 4).
Every inserted digit is displayed as a dot. will conrm the code.
The following codes can be entered:
• Master code to enter Programming menu (see Master on page 10)
• Admin code to enter Programming menu with restricted permission (see Admin on
page 10)
• Trade code to open door (if enabled - see Trade on page 10)
• a valid Access code , the door will be open, or NOT FOUND! message will appear.
To delete digits or exit page press
to conrm
to canc
Code: • • • • • •
Fig. 4
HOW TO CALL AN APARTMENT
From standby mode, enter a at number (see Fig. 5).
Each digit will be displayed. Pushing will conrm the at number.
If at number is present in memory and user is enabled then a call request is made, or
NOT FOUND! message will appear.
To delete digits or exit page press .
123
to conrm
to canc
Fig. 5
Art.4312 Audio/video digital front panel

Videx 4000 Series Specifications

General

Series	4000 Series
Category	Intercom System
Material	Stainless Steel
Operating Voltage	12V DC
Housing Material	Stainless steel
Compatibility	Compatible with Videx audio and video internal units