EasyManuals Logo

Videx 4000 Series Installation Instructions

Videx 4000 Series
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
66252090 - V1.2 - 15/03/24
- 3 -
4000 Series
Art.4312 - Installation instructions
Art.4312 Audio/video digital front panel
SCROLLING USERS
From standby mode, pressing or will begin scrolling. The highlighted central line is the selected user: pressing or will
make a call request.
For 15 button panel version scrolling is made using or , for 18 button version A and C buttons are used (this function is active
only while searching for a user to modify inside the programming users menu).
Callers can press a lettered key to jump to users beginning with that letter. The letter will appear next to the
abc
symbol.
If no users are found with that letter the panel will revert to the previous selection.
HOW TO MAKE A CALL
A call request can be made by either scrolling the user name or entering the at num-
ber. When a call is in progress the panel will show CALLING as in Fig. 6.
The CALLING message alternates with at number (if user has made a call by typing
number) or name (if the scroll was used).
If bus is busy or intercom is not present, BUSY! message will appear on the screen. If
no answer after 40 seconds the call will be cleared.
If the call is answered a conversation can begin.
The display will be as per Fig. 7. The conversation time-out is programmable param-
eter speech time (see Speech time on page 9) in seconds. If the door is released
this time is reduced to 10 seconds.
When the door is released, the animation appears on the screen and to the right of
that the following information is displayed:
Flat number or name
block Id (if system works in MAIN MODE - see Panel mode on page 11)
oor (if in NORMAL MODE - see Mode on page 11)
To delete a call request or close a conversation press
. The panel will show the
CALL END message.
calling
Fig. 6
1 CONCIERGE
Fig. 7
HOW TO TYPE TEXT
Text typing with Art. 4312 is similar to
mobile phone text typing. This table
shows the characters and symbols that
can be typed by pressing one or more
times the keypad numeric push buttons.
The alphabetic push buttons , and
are used for special functions:
to scroll back
to scroll forward
to alternate between capital and
lower case letters
For instance, to type the name VIDEX it is
necessary to press:
3 times 8 button = V
3 times 4 button = I
1 times 3 button = D
2 times 3 button = E
2 times 9 button = X
The cursor moves forward when, after inserting a character, the same button is not pressed for more than one second or a dierent
button gets pressed.
Press no. of times
Key 1 2 3 4 5 6 7 8 9 10 11 12 13
1 space . & ! : = # @ " 1
2 a b c 2
3 d e f 3
4 g h i 4
5 j k l 5
6 m n o 6
7 p q r s 7
8 t u v 8
9 w x y z 9
0 + - * , 0
_
Scroll back
Alternate between capital and lower case
Scroll forward
ACOUSTIC SIGNALS
Name Signal Event
Key Tone Single beep Key press.
Overow Tone/
Error Tone
Quadruple quick beep When user inserts a numeric value that exceed the maximum value
When searching a user by letter and no users are found (last inserted character is deleted)
When saving data to memory fails.
Tag Tone Double beep When a fob or a card is passed in front of NFC antenna.
Save Tone Long single beep When saving data in memory is successful.
Open Door Tone Triple beep When door is opened.

Other manuals for Videx 4000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Videx 4000 Series and is the answer not in the manual?

Videx 4000 Series Specifications

General IconGeneral
Series4000 Series
CategoryIntercom System
MaterialStainless Steel
Operating Voltage12V DC
Housing MaterialStainless steel
CompatibilityCompatible with Videx audio and video internal units

Related product manuals