Videx 4000 Series Installation Instructions

66252090 - V1.2 - 15/03/24
- 4 -
4000 Series
Art.4312 - Installation instructions
HOW TO SET MICROPHONE AND SPEAKER VOLUME
• Place a call to an apartment
• When the call is answered and the screen shows the SPEAK message, hold down 2
and 8 for around 3 seconds. A new screen asking for Master code will appear (Fig. 8)
• After entering the code, the audio settings page appears, allowing to
increase/decrease (Fig. 9):
» Microphone (1 and 3)
» Speaker (4 and 6)
» Balancing (7 and 9)
• Press
to save and make and apply these changes.
Audio Setting
to conrm
to canc
Code:
Fig. 8
:
:
Audio Setting
1-3, 4-6, 7-9 to set
1: Microphone 14
2: Speaker 1
3: Balancing 11
Fig. 9
HOW TO SET VOICE ANNUNCIATION VOLUME
• From the home page, hold down 2 and 8 for around 3 seconds. A new screen ask-
ing for Master code will appear (Fig. 10)
• After entering the code, the voice annunciation settings page appears, allowing to
increase/decrease (Fig. 11):
» Annunciation messages volume (1 and 3)
“1,2,3” is played once the volume is changed.
• Press
to save and and apply these changes.
Speech Setting
to conrm
to canc
Code:
Fig. 10
:
:
Speech Volume Setting
1-3 to set
1: Volume 18
Fig. 11
HOW TO SET SCREEN CONTRAST
• From the home page, hold down 4 and 6 for around 3 seconds. A new screen ask-
ing for Master code will appear (Fig. 12)
• After entering the code, the screen settings page appears, allowing to
increase/decrease (Fig. 13):
» screen contrast (1 and 3)
• Press
to save and and apply these changes.
Screen Settings
to conrm
to canc
Code:
Fig. 12
:
:
Screen Settings
1-3 to set
1: Contrast 5
Fig. 13
Art.4312 Audio/video digital front panel

Videx 4000 Series Specifications

General

Series	4000 Series
Category	Intercom System
Material	Stainless Steel
Operating Voltage	12V DC
Housing Material	Stainless steel
Compatibility	Compatible with Videx audio and video internal units