66250675-EN - V1.0 - 05/09/17
20
4000 Series Vandal Resistant GSM Audio Intercom with Proximity Facility
4000 Series Vandal Resistant GSM - Technical Manual
TERMINAL CONNECTIONS, HARNESS CONNECTIONS AND USB INPUT
Terminal Description
0V Switched 0V input.
AO Programmable auxiliary output (switched 0V).
I1
5 programmable auxiliary inputs. To program these inputs please refer to the technical manual:
UIM-138 Display Module Manual - Technical Manual Edition 1.0
I2
I3
I4
I5
UIM-138 Harness
Connection
5 pin UIM-138 harness input to CN3 connection on the GSM module.
(see connection diagram below).
USB Input
USB cable input to connect laptop ⁄ PC for programming the VR4KDM module.
(see connection diagram below).
TECHNICAL SPECIFICATION
Working Voltage : 12 - 14Vdc +/- 10%
Standby Current : approx. 29mA
Max. Current : approx. 34mA (max.)
Harness Connection : 5 pin connector
USB Port : standard USB cable input
Dimensions : 103mm (W) x 120mm (L) x 32mm (D)
Working Temp. : -10 +50
o
C
CONNECTING THE VR4KDM TO THE GSM MODULE
Fig.15 below shows how to connect the display module to the vandal resistant GSM module using the UIM-138 connection harness
and then connecting the display module to a laptop/PC via the USB cable input.
UIM-138
User information module
Made in Italy
USB 0V A0 I1 I2 I3 I4 I5
Up Down High Low
UIM138 1.3 - UIM138 SP10
Art. VR4KDM
CN3
CN1
USB
CN6
CN5
To Next Page
Loading...
