Videx VRVK Series - Art. VR4 KCM Camera Module

66250693-EN - V5.1 - 30/09/20
- 8 -
VRVK/6256 Series “6 wire Bus” Vandal Resistant videokit
VRVK/6256 Series - Installation handbook
CONNECTION TERMINALS SIGNALS
SL Active low input to enable the camera lightning (the
jumper JP2 must be moved in SL position)
SB Heater ground input
V2 Balanced video signal sync–
V1 Balanced video signal sync+
V Coax video signal
— Ground input
SB Heater plus input 12V
+20 20Vdc power supply input
+12 12Vdc power supply input
TECHNICAL SPECIFICATION
Working voltage: 12Vdc/24Vdc
Power consumption while operating: 100mA
Working Temperature: -10 +50°C
CLEANING OF THE PLATE
Use a clean and soft cloth. Use moderate warm water or non-ag-
gressive cleansers.
Do not use:
• abrasive liquids;
• chlorine-based liquids;
• metal cleaning products.
Art.VR4KCMC Camera module