External extension H1
The external extension is connected
to the boiler control unit via the KM
BUS. The following functions can be
controlled or processed simulta-
neously via the extension:
A ON/OFF switch (on site)
sÖ Heating circuit pump for the
heating circuit without mixer
fÖ Power supply
gÖ Central fault message
aVD
&
External blocking
&
(terminals 2 - 3)
&
External demand
&
(terminals 1 - 2)
&
External heating program
changeover (terminals 1 - 2)
(only for weather-compen-
sated operation)
&
The allocation of function
"External heating program
changeover" is set via coding
address "91".
aVF External set value 0 to 10 V
aVG KM BUS
To Next Page
Loading...
