Fitting roof hooks for roof tile cover
1. Push up the roof tiles in accor-
dance with the dimensions shown
in the illustrations on page 7
and 10.
2. Secure the timber to the joists at
the head of the exposed rows of
tilesinaccordancewiththedimen-
sions shown in the illustration on
page 7.
3. Hook the r oof hooks into the timber
in accordance with the dimensions
shownintheillustrationsonpage7
and 10.
4. Remove the drip tabs and protru-
sions from the roof tiles in the roof
hook area.
5. Secure the roof hooks and position
the roof tiles.
Continue with "Mounting rail instal-
lation" on page 13.
Horizontal rooftop installation (cont.)
11
5862 788 GB
To Next Page
Loading...
