Installing the connecting chamber
Interconnecti ng pipes should no t
cause any da mage.
Lubricate all plug-in connections (O-
ring seals) on the collectors only with
the special lubricating grease
included in the connection set.
1. Insert the interconnecting pipes
into the flow and return connectors.
2. Push the next connecting cham-
bers carefully onto the f irst and
insert the interconnecting pipes.
3. Align and secure the connecting
chambers.
4. Click the retaining clips into posi-
tion.
Water connections
45
5862 788 GB
To Next Page
Loading...
