Vitodens 100-W, WB1A
Set up for operation with natural gas.
Montagevorbereitung
General Information
Appliance description
The Vitodens 100-W is a fully automa-
tic, wall hung, fan assisted balanced
flue condensing boiler for use with
Natural Gas (G20) and is designed for
use with fully pumped systems only.
There are three models of the
Vitodens 100-W in the range which
are fully modulating between 8.0 kW
(27,300 Btu/h) and 13.0 kW (44,400
Btu/h)/18.0 kW (61,400 Btu/h)/24.0
kW (81,900 Btu/h).
Internal frost protection and an elect-
ronic control unit is fitted as standard
equipment. The boiler may be used
with any suitable room thermostat and
/ or time clock in addition to the optio-
nal controls available from
Viessmann.
Asbestos, mercury or CFC´s have not
and will not be used in this product.
Certification details
The Vitodens 100-W is certified to
comply with the requirements of pr EN
483 and EN 625 for use in GB and IE
(Great Britain and Ireland) using gas
category 2H (G20) with a governed
gas supply at 20 mbar (8 in.wg) inlet
pressure.
The appliance classification is either
C
13x, C33x, C63 or C63x depending
upon whether horizontal or vertical
flue termination is used.
To Next Page
Loading...
Need help?
General