Initial Start-up and Service
12
Steps (continued)
3. Select language (if required)
Initial start-up
Menu-driven programming unit.
LANGUAGE / LANGUE
>ENGLISH:.................A
>FRANÇAIS:...............B
>BACK / RETOUR: ......D
Open cover:
Menu option Button
→ SYSTEM ”D”
→ FACTORY SETTING ”A”
→ LANGUAGE ”C”
Select language.
4. Heating contractor address input
Initial start-up
Menu-driven programming unit.
This option allows the system user to access name and telephone number of the
heating contractor on the display (see Vitodens 200 Operating Instructions) almost
immediately after a system fault has occurred.
HEATING CONTRACTOR
INPUT NAME/TEL.:
TEL.:
>CHANGE: -/+
>POSITION FORWARD:A
>POSITION BACK: ......B
>INSTALLER SETUP: ...D
Open the cover:
Menu option Button
→ SYSTEM ”D”
→ INSTALLER SETUP ”C”
→ CODE PLEASE: ”B-C-C-B”
→ DIAGNOSIS ”A”
→ HEATING
CONTRACTOR ”C”
Position cursor as required using
the ”A”and”B” buttons.
Select the required characters (number,
letter, special character) by t urning
the ”G” selector knob (turn
clockwise or counterclockwise).
Sequence of available characters:
0123456789ABCDEF
GHIJKLMNOPQRSTUV
WXYZ=<>.:k ?,–i/()
Characters already selected can be
deleted with the space character ”k”or
overwritten with another character.
Upon exiting the input menu
(INSTALLER SETUP ”C”), name and
telephone number of the heating
contractor are automatically stored.
5285 961 v1.3
To Next Page
Loading...
