View Quest Bardot - App Installation and Bluetooth Setup

GB
Bardot Operation Guide
18
Installing the View Quest App
1. Go to the appropriate store for your device; App Store for Apple, Play Store for Android. The simplest way to
nd the View Quest App is to use the search bar at the top of the screen to nd “viewquest” (with no quote
marks). The App is called “View Quest”, it’s free to install and use and its icon looks like this:
2. Install the App by pressing the INSTALL button.
Setting up the connection with your Bardot
1. After you have installed the View Quest App, the next step is to establish a Bluetooth connection between
your remote and your Bardot. Please follow the section “Pairing your Bardot with a Bluetooth device” on page
16.
2. Having paired successfully, Tap the icon on your remote to start the app.
3. The App splash screen will display briey, then the Radio List screen, which will display your Bardot as an
Unknown Bluetooth device. Click on the Bardot entry, and the app will connect with your Bardot.
You are now in control of your Bardot.
[Optional] Quickly setting up the app display for your remote
The View Quest App automatically optimises its display for the type of device it is running on; it uses a dierent
layout on a phone (portrait) to a tablet (landscape) . So if you are, for example, using a tablet in portrait
mode, your display may not be optimal. To change this:
1. Tap your device’s menu key (see your device user manual for assistance nding this).
2. Tap the Settings button for settings.
3. Tap the button next to UI type and select Smartphone or Tablet.
4. The display will adapt to the new setting.
[Note] The View Quest App does not rotate in normal use.
[Note] Selecting Tablet UI type on a small device may truncate some information.