View Quest Bardot - Time, Date, and Alarm Setup

GB
Bardot Operation Guide
26
2. Use the - TUNING + knob to nd and select the options you prefer.
To set time manually:
1. Select “Set Time/Date”
2. Turn the - TUNING + knob to select correct hours, press the - TUNING + knob to conrm.**
3. Turn the - TUNING + knob to select correct minutes, press the - TUNING + knob to conrm.
4. Turn the - TUNING + knob to select correct day, press the - TUNING + knob to conrm.*
5. Turn the - TUNING + knob to select correct month, press the - TUNING + knob to conrm.*
6. Turn the - TUNING + knob to select correct year, press the - TUNING + knob to conrm.
**The value of this item is aected by your hour format setting
*The order of these items are aected by your date format setting.
Alarms
Your Bardot provides highly exible dual alarms. Before setting your alarms, please set the time and date as
detailed in the previous section. Then:
1. Press the ALARM button repeatedly to select ‘Alarm 1 Setup’ or ‘Alarm 2 Setup’ and press the - TUNING +
knob to conrm. This will start the Alarm Wizard.
2. The Alarm Wizard will step you through the alarm options. Turn the - TUNING + knob to select options, and
then press the - TUNING + knob to conrm the settings and move to the next option.
(To cancel alarm setup, press ALARM button again.)
Options are as follows:
Alarm states: On or O
Alarm time: 00:00 (manually set up the time )
Alarm duration time: 15/30/45/60/90 mins
Alarm source: DAB, FM or buzzer (If you select DAB or FM, you can choose your last listened to station,
or Preset 1, if set)
Alarm active day: Daily, Once, Weekends or Weekdays
Alarm volume: Turn the - TUNING + knob to adjust the alarm volume
3. When the display shows ‘Alarm Saved’, the alarm setting is set.
4. To temporarily switch o alarm, press the SNOOZE button when the alarm is sounding. Press the SNOOZE
button repeatedly to set Snooze period time of 5, 10, 15 or 30 minutes in turn. The selected snooze time will
show as “Snooze mm : ss” on the display.
Note: Dierent Snooze periods are available depending on alarm duration.
5. To turn o the Alarm, press the POWER or ALARM buttons when the alarm is sounding.