ViewSonic CDE30 Series User Manual

63
Item Descripon
Auto Signal Detecon
Let the display detect and display available input sources
automacally.
No Signal Standby
Set the me period to enter Standby Mode when there is no
signal.
HDMI with One Wire
Enable/Disable CEC (Consumer Electronics Control).
CEC synchronizes power on/o operaon via HDMI connecon.
That is, if a device that also supports CEC is connected to the
HDMI input of the display, when the display’s power is turned
o, the power of the connected device will also be turned o
automacally. When the power of the connected device is
turned on, the display’s power will be turned on automacally.
HDMI EDID Version
Select HDMI EDID version: EDID 1.4, EDID 2.0, Auto.
USB Cloning
Save the OSD Menu conguraon to the USB storage.
USB Auto Play
If set to ON, the display will copy media les from the external
USB storage to the display’s internal storage then play the
media les automacally.
Switch on State
Select the display status for the next me the power cord is
connected to a power outlet.
Power O
The display will remain o when the power cord is connected.
Forced On
The display will turn on when the power cord is connected.
Last Status
The display will return to the previous power status.
WOL
Enable/Disable the Wake on LAN (WOL) feature.
Monitor ID
Assign a number to remote control the display by RS-232.
NOTE: The number range is: 1~98; 99 is reserved for “All
Displays”.
Language
Select OSD Menu language.
Factory Reset
Reset all OSD Menu sengs to default.
Advanced Reset
Reset all Advanced menu sengs to default.

ViewSonic CDE30 Series Specifications

General

Brand	ViewSonic
Model	CDE30 Series
Category	Monitor
Language	English