ViewSonic IFP32-2 Series User Manual

4747
Adjust Sengs - (VGA Only)
1. Press q on the remote control and select the Adjust menu.
2. Press q/p/t/u on the remote control or directly touch the opon to select it.
3. Adjust your preference by touching each value directly, or with the remote
control by pressing ENTER.
4. Press BACK on the remote control, or touch a blank area outside of the menu to
exit.

ViewSonic IFP32-2 Series Specifications

General

Brand	ViewSonic
Model	IFP32-2 Series
Category	Monitor
Language	English