ViewSonic PA503HD - Page 47

47
Menu Descripon
3D
3D Mode
Enable or disable the 3D funcon.
3D-2D
Select how the 3D content should appear on screen.
Opon Descripon
3D Display the 3D signal.
L (Le)
Display the le frame of the 3D
content.
R (Right)
Display the right frame of the 3D
content.
3D Format
Select the 3D content format.
NOTE: A Blu-ray 3D source will be detected
automacally, and opons will not be selectable.
Opon Descripon
Auto
When a 3D idencaon signal is
detected, the 3D format is selected
automacally.
Side by Side Display in Side-by-Side format.
Top and Boom Display in Top and Boom format.
Frame Sequenal Display in Frame Sequenal format.
3D Sync Invert
Enable or disable the 3D Sync Invert funcon.
3x Fast Input
When enabled, quick response me in a nave ming can
be reached. The following sengs will also return to factory
preset values: Format, Edge Mask, Zoom, Image Shi, V
Keystone, Auto Keystone, and 3D funcons.
NOTE:
• This funcon is only available when a nave
ming input signal is selected.
• If you want to adjust Format, Edge Mask,
Zoom, Image Shi, V Keystone, Auto Keystone,
or 3D funcon, please disable 3x Fast Input.
NOTE: This projector is a 3D ready projector with DLP-Link 3D soluon. Please
make sure your 3D glasses are for DLP-Link 3D. This projector supports
frame sequenal (page-ip) 3D via the HDMI 1/HDMI 2 ports. For the
best performance, 1920 x 1080 resoluon is recommended. Please note
that 4K (3840 x 2160) resoluon is not supported in 3D mode.