ViewSonic PA503HD - Page 49

49
Menu Descripon
Advanced
Logo
Set the “startup screen”. If changes are made, they will take
eect the next me the projector is powered on.
Opon Descripon
Default ViewSonic startup screen.
Neutral
Same color as Background Color
seng.
HDMI CEC
When you connect HDMI CEC-compable devices to the
projector with HDMI cables, you can control them on the
same power on or power o status using the HDMI CEC
control feature in the projector’s OSD. This lets one device or
mulple devices in a group power on or power o via HDMI
CEC in a typical conguraon.
NOTE:
• In order for the CEC funcon to work properly,
make sure that the device is correctly
connected to the HDMI input of the projector
via an HDMI cable, and its CEC funcon is
turned on.
• Depending on the connected device, the CEC
funcon may not work.
• The CEC funcon supports the projector
powering o the device and the device
powering on the projector.