ViewSonic PJL7201 - Remote Control Battery Installation

ViewSonic 16 PJL7200/PJL7201/PJL7202
Remote Control
Remote Control Batteries Installation
1. Remove the battery cover.
2. Load the batteries.
Make sure the poles are correctly oriented.
3. Close the battery cover.
Caution
►Avoidexcessiveheatandhumidity.
►Donotdroptheremotecontrol.
►Iftheremotecontrolwillnotbeusedforanextendedperiod,removethebatteries.
►Donotexposetheremotecontroltowaterormoisture.Thiscouldresultin
malfunction.
►Replacethebatterywhenremotecontroloperationbecomessluggishor
unresponsive.
►Donotplacetheremotecontrolclosetothecoolingfanoftheprojector.
►Donotusebatteriesofdifferenttypesatthesametime.
►Donotmixanewbatterywithusedone.Makesuretheplusandterminalsare
correctly aligned when loading batteries.
►Disposeofbatteriesinaccordancewithenvironmentallaws.
►Donotdisassembletheremotecontrol.Iftheremotecontrolneedsservice,please
contact your dealer.