ViewSonic VP2786-4K - Page 47

47
Menu Opon Descripon
OSD Pivot
Set the OSD Menu orientaon.
• Auto: With the built-in G sensor, the OSD Menu can
automacally pivot when the monitor is posioned
vercally.
• 0°: Sets the OSD Menu without a pivot.
• +90°: Sets the OSD Menu with a +90° pivot.
• -90°: Sets the OSD Menu with a -90° pivot.
• 180°: Sets the OSD Menu with a 180° pivot.
Power Indicator
Set the Power Indicator On or O. If the seng is set to On,
the power indicator lights blue when the device is turned
on.
Auto Power O
Enable this opon to allow the monitor to automacally
turn o aer a certain amount of me.
Sleep
Set the amount of idle me before the monitor enters Sleep
mode.
Mul-Picture
O
Disable this funcon.
PBP Le-Right
Display two windows, a 1x1 split screen, side-by-side on
the le and right of the screen. User can specify the input
source for each screen.
PIP
Split the screen into two parts, a main window and an inset
window. User can specify the input source for each screen.
Dual Color
Display two dierent color sengs in PIP or PBP mode.
ECO Mode
Choose between various modes, based on power
consumpon.
Overscan
Enable this opon to automacally enlarge the original
picture horizontally and vercally to an equal aspect rao
that lls the screen.