20
To connect to a media player:
1. Connect an HDMI cable to the HDMI ports (or connect a DisplayPort cable to the
DisplayPort port) on your display and peripheral device.
2. Plug in the power cord of your display, and turn on the power supply switch.
3. Press the
Power button to turn on the display.
4. Press the INPUT button on the remote control and switch to the “HDMI” input
source.
• HDR is not supported on the IFP30 series.
• HDMI 1/2 supports up to 3840 x 2160 @ 60Hz
• DisplayPort supports up to 3840 x 2160 @ 60Hz
To Next Page
Loading...
