2828
To select an Input Source:
1. Press INPUT on the remote control to display the General Setting menu.
2. Press q/p/t/u on the remote control to select the input source you want.
3. Press ENTER on the remote control to confirm the input source.
4. Press BACK on the remote control to exit.
PC source will only display when the slot-in computer is connected.
To adjust the Backlight and enable/disable Flicker-Free:
1. Press INPUT on the remote control to display the General Setting menu.
2. Adjust the brightness level by using the remote control’s directional arrows to
select increase/decrease brightness and pressing ENTER.
3. To enable/disable Flicker-Free, select it with the remote control’s directional
arrows and press ENTER.
When the backlight is 100%, Flicker-Free will be turned on.
4. Press BACK on the remote control to exit.
To Next Page
Loading...
