ViewSonic VSD231 - Start-Up and Initial Setting

5
F. Start-up and initial setting
Turn on the Power
1) Make sure the power cable and AC adapter are connected.
2) Press the power button until you see the power LED lighting green.
1) Select your language and tap
“Start”.
2) Select a Wi-Fi network.
You must connect to a WiFi
network to complete the Google
Setup Wizard process.
3) Tap “Yes” to setup your
Google account or “No” to
congure later.
4) Tap “Not now”.
When using services such as
Google Play, tap “Sign in” and “Get
an account” to log in with your
Google account. Follow instructions
on the screen for details.
5) Conrm onscreen instructions
and tap “ ”.
6) Select the appropriate time
zone to set the date and time,
and then tap “ ”.
7) Enter username and tap “ ”.
8) Conrm onscreen instructions
and tap “
”.
9) Tap “Finish”.
10) Conrm onscreen
instructions and tap “OK”.
The initial settings are
completed.