ViewSonic VT2430 - Remote Control Functions: Media & Settings

16ViewSonic VT2430
ENGLISH
Using the Display Features
Inserting Remote Control Batteries
1. Remove the battery cover by pulling then lifting the knob on the cover.
2. Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment.
3. Reattach the battery cover.
CAUTION
• Only use the specied AAA batteries.
• Do not mix new and old batteries. This may result in creaking or leakage, which may pose
a risk of re or lead to personal injury.
• Insert batteries according to (+) and (-) markings. Inserting the batteries incorrectly may
result in leakage, which may pose a risk of re or lead to personal injury.
• Dispose of the battery in accordance with local laws and regulations.
• Keep the batteries away from children or pets.
• When the remote control will not to be used for an extended period, remove the batteries.
Remote Control and Display Controls
Buttons located at the bottom of the LCD Display will operate the
same as these buttons on the remote control.
Button Description
1
訊號源
SOURCE
Select input source.
2
數字鍵
NUMBER KEYS
Press the number keys to enter channel
numbers.
Remote Control and Display Controls