11
www.vigocool.eu
The battery protection function determines the voltage at which the refrigerator will shut down
(switch-off voltage). The device will restart when the battery is charged to the required value
(turn-on voltage). The default battery protection mode is high (H). In order to change the
battery protection mode, hold down the "SET" button for a few seconds, and then change the
mode by pressing the "SET" button. The table below shows the differences between the
different modes. It is worth remembering that the results may differ slightly between
individual models. High mode is recommended when connecting a refrigerator in a vehicle,
and medium and low mode when using portable/built-in batteries.
3.6. Connection to the application
The refrigerator can be controlled using an application downloaded to the phone. To do this,
download the VIGOCool SMART SOLUTION application from the Google Store or Apple
Store (for convenience, a QR code redirecting to the appropriate application is placed on the
product's carton). Then turn on the bluetooth function and turn on the location on your phone.
After turning on the application, search for the right device and select the refrigerator. After
completing these steps, "APP" should appear on the display of the refrigerator. When it is
displayed, press the "SET" button on the refrigerator to pair the two devices. From now on,
you can control your refrigerator with the app!
To Next Page
Loading...
