9
www.vigocool.eu
Control panel V35
Control panel V40R, V50R
3.2. Connecting and turning on the refrigerator
Connect the device to a DC 12/24V or AC 100~240V power socket (using the power
adapter). Press the “ON/OFF” button to turn on the device. Pressing the switch again will turn
the refrigerator off.
3.3. Basic fridge maintenance
The "ON/OFF" button turns the refrigerator on and off. The ˄ or + buttons are used to raise
the temperature. The ˅ or - buttons are used to lower the temperature.
The "SET" button allows you to select the temperature value, temperature units, cooling rate
and battery protection mode.
3.4. Temperature settings, change of operating mode
The temperature of the refrigerator can be changed by pressing the ˄ or + (temperature
increase) and ˅ or – (temperature decrease) buttons. After selecting the correct temperature,
wait 4 seconds to save the current settings. The refrigerator will begin to cool down to the
selected value. The display shows the CURRENT temperature, not the temperature selected
To Next Page
Loading...
