19
www.vigocool.eu
V36WT control panel
3.2. Connecting and turning on the refrigerator
Connect the device to a DC 12/24V or AC 100~240V power socket (using the power
adapter). Press the power button to turn on the device. Pressing the switch again will turn
the refrigerator off.
3.3. Basic fridge maintenance
The “ON/OFF” button turns the refrigerator on and off. The + buttons are used to raise
the temperature. The – buttons are used to lower the temperature.
The "SET" button allows you to select the temperature value, temperature units, cooling
rate and battery protection mode.
To Next Page
Loading...