16
www.vigocool.eu
required value (turn-on voltage). The default battery protection mode is high (H). In order
to change the battery protection mode, hold down the "SET" button for a few seconds,
and then change the mode by pressing the "SET" button. The table below shows the
differences between the different modes. It is worth remembering that the results may
differ slightly between individual models. High mode is recommended when connecting a
refrigerator in a vehicle, and medium and low mode when using portable/built-in batteries.
3.6. Connection to the application
The refrigerator can be controlled using an application downloaded to the phone. To do
this, download the VIGOCool SMART SOLUTION application from the Google Store or
Apple Store (for convenience, a QR code redirecting to the appropriate application is
placed on the product's carton). Then turn on the bluetooth function and turn on the
location on your phone. After turning on the application, search for the right device and
select the refrigerator. After completing these steps, "APP" should appear on the display
of the refrigerator. When it is displayed, press the "SET" button on the refrigerator to pair
the two devices. From now on, you can control the refrigerator with the app!
To Next Page
Loading...
