10
G
instructions, on page 13 of this manual. The battery must not
be disposed of with household waste.
• The robot must be disconnected from the mains supply when
removing the battery.
• WARNING: If the battery is damaged in any way, do not
attempt to recharge it. Contact Vileda customer service
address (see last page).
• Charge the battery for 5 hours before first use. After the first
use, charging time is about 4-5 hours.
• If the robot is not to be used more than 3 months, charge it
directly by power adapter for 5 hours.
• WARNING: Only use a battery as supplied by Vileda.
SERVICE
• Before using the robot and after any impact, check for signs
of wear or damage.
• Do not use the robot if any part is damaged or defective.
• Repairs should only be carried out by an approved service
agent or a suitably qualified person.
• Never modify the robot in any way as this may increase the
risk of personal injury.
• Only use replacement parts or accessories provided or
recommended by Vileda.
2. GETTING TO KNOW VR 102
Please use page 3 in the manual for reference.
1. Display 3b. Filter frame 8. Charging socket
1a. Power button 4. Maintenance brush 9. Suction opening
1b.* Auto-cleaning button
(not for VR ONE)
5. Soft bumper 10a/10b. Wheels
1c*. Quiet Button
(not for VR ONE)
6. Front bumper 11. Front wheel
2. Dust box cover 7. Side brushes 12. Battery cover
3. Dust box incl. fine dust filter 13. Drop sensors
3a. Fine dust filter
To Next Page
Loading...
