14
Area management
Dimmer feature when it is combined with the "Brightness Sensor"
If the system is fitted with a brightness sensor combined with art. 01467, you can keep the brightness in a room
automatically constant according to the value read by the sensor and a brightness setpoint that is set automatically
with each adjustment on the dimmer.
The function of keeping the brightness constant can be switched on/off at any time by tapping ; in this
case the controls become the same as for any other dimmered lighting point.
This function then allows obtaining energy savings as natural light is used, as long as possible, instead of artificial
light for lighting the room.
On the touchscreen, the dimmer combined with the brightness sensor can be added to any room screen and the
view is similar to the following:
To Next Page
Loading...
Need help?
General