VINCENT SA-32 - Troubleshooting; Common Issues and Solutions

Vincent 37
Symptom Possible Cause Countermeasure
No sound on both
channels although
the unit is ready for
use
소
소소기기에서 음성신호가 없음
.
The currently selected audio source (8) is
giving no signal.
DVD
플레이어의
출력
세팅
오류
One of the audio settings of a connected
DVD player (analogue/digital) has not been
correctly selected.
소스기기
연결
오류
The source device is not connected or is
wrongly connected to the selected input
channel terminal of the preamplifier.
입력선택
오류
Wrong input channel has been selected at the
preamplifier.
너무
낮은
볼륨
VOLUME is set too low at the pre-amplifier.
프리앰프-메인앰프 연결 불량
Main amplifier(s) has/have not been
connected correctly to the preamplifier, is/are
switched off or is/are faulty.
스피커
연결
불량
The speaker cables are
not properly connected to the main amplifier's
terminals or aredefective.
소스기기 전원 및 작동확인
Switch on the source unit and begin play-back.
세팅
수정
(
아나로그
/
디지털
)
Correct the settings in the player’s setup.
연결 확인 및 수정
Correct the connection.
입력선택 확인
Set the amplifier to the input
that your desired source is connected to (8).
볼륨 올림
Carefully increase the volume (6).
메인앰프 연결 및 동작 확인
Check the connection and status of the main
amplifier(s) and whether it is/they are working.
스피커 연결 확인
Check and tighten the speaker cables at the
main amplifier and the speakers.
Unit does not work
after pressing the
power button
전원이

들어오지
않음
전원코드 연결 불량
Mains cable is not connected to a suitable
mains wall outlet. Mains cable has not been
firmly inserted into wall power socket and the
device’s socket.Otherwise it may be defective.
퓨즈 불량 혹은 제품고장
Unit fuse or unit is defective.
전원코드 연결 확인
Connect to a functioning socket using a
suitable mains voltage.
아프터서비스 의뢰
Contact your dealer.
소리가 안남.
이상
증상
대처요령
SEARCH FOR ERRORS