VIPA SLIO Series - VIPA 007-1 AB10 Module Details

Manual VIPA System SLIO Chapter 2 Power modules
HB300E - PS-CM - Rev. 11/28 2-7
VIPA 007-1AB10 - DC 24V 4A, DC 24V/5V 2A
If the 3A for the electronic power supply of the I/O area is no longer
sufficient, you may use the power module. Additionally the power module
serves for a new isolated group for the DC 24V power section supply with
max. 4A.
The power module is externally to be supplied with DC 24V.
• 2A feed-in for DC 24V electronic power supply I/O area
• 4A feed-in for DC 24V power section supply I/O area
• Overvoltage protection
• Polarity reversal protection
1
3
5
4
6
7
8
9
2
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
Locking lever terminal module
Labeling strip
Backplane bus
LED status indication
DC 24V power section supply
Electronic module
Terminal module
Locking lever electronic module
Terminal
LED Color Description
PWR IO green
●
Power section supply OK
PF IO red
●
Fuse power section supply defective
(Power fail)
PWR green
●
Electronic section supply OK
PF red
●
Fuse electronic section supply defective
Status indication
PWR IO
PF IO
PWR
PF
on: ● off: ○ blinks with 2Hz: ☼
Description
Properties
Structure