VIPA SLIO Series - About this Manual; Manual Overview and Purpose

Manual VIPA System SLIO About this manual
HB300E - PS-CM - Rev. 11/28 1
About this manual
This manual describes the power modules (PS = power supply) and clamp
modules (CM) of the System SLIO from VIPA. Here you may find besides
of a product overview a detailed description of the single modules. You’ll
receive information about the connection and the deployment of the
System SLIO PS and CM modules.
Chapter 1: Basics and Assembly
The focus of this chapter is on the introduction of the VIPA System SLIO.
Here you will find the information required to assemble a controller system
consisting of System SLIO components.
Besides the dimensions the general technical data of System SLIO will be
found.
Chapter 2: Power modules
In this chapter you will find the description of the power modules of the
System SLIO from VIPA.
Chapter 3: Clamp modules
The description of the clamp modules of the System SLIO will be found
here.
Overview