VIPA SLIO - Technical data counters

Order no. 050-1BA00
Current consumption from load voltage L+
(without load)
-
Output delay of "0" to "1" 30 µs
Output delay of "1" to "0" 30 µs
Minimum load current -
Lamp load 10 W
Parallel switching of outputs for redundant con-
trol of a load
not possible
Parallel switching of outputs for increased
power
not possible
Actuation of digital input
ü
Switching frequency with resistive load max. 10 kHz
Switching frequency with inductive load max. 0.5 Hz
Switching frequency on lamp load max. 10 kHz
Internal limitation of inductive shut-off voltage L+ (-52 V)
Short-circuit protection of output yes, electronic
Trigger level 1 A
Number of operating cycle of relay outputs -
Switching capacity of contacts -
Output data size 10 Byte
Technical data counters
Number of counters 1
Counter width 32 Bit
Maximum input frequency 100 kHz
Maximum count frequency 400 kHz
Mode incremental encoder
ü
Mode pulse / direction
ü
Mode pulse -
Mode frequency counter -
Mode period measurement -
Gate input available
ü
Latch input available
ü
Reset input available
ü
Counter output available
ü
Status information, alarms, diagnostics
Status display yes
Interrupts yes, parameterizable
VIPA System SLIO Hardware description
Technical data
HB300 | FM | 050-1BA00 | GB | 14-36 35