Commands
17
© 2009 Directed Electronics. All rights reserved.
Runtime Reset
Press and release
If more time is needed while remote start is active, runtime reset
will reset the runtime counter to the pre-programmed setting. The
RUNTIME
text and tones play to confirm. The text field will update
if set to display runtime.
Note
Remote Start must be On to use this feature.
Temp Request
Press and hold the button
Requests the vehicle’s interior temperature and temporarily displays it
via status screen icon
and text field.
* See Remote and System Operations section for details.
** See Alarm Features for details.
To Next Page
Loading...
