To Next PageTo Next PageWhy does the water from my Viqua VH200 appear milky?
If the water from your Viqua Water Filtration System appears milky, it's likely caused by air in the water lines. Run the water until the air is purged.
General| Lamp Life | 9000 hours |
|---|---|
| Inlet/Outlet Size | 3/4" MNPT |
| Chamber Material | 304 Stainless Steel |
| Maximum Operating Pressure | 125 psi (8.6 bar) |
| Voltage | 120 V |
| Type | UV Disinfection System |
| Maximum Water Hardness | 120 ppm |
| Power Supply | Standard Ballast |
| Certifications | NSF/ANSI 55 Class B |
Describes various symbols and their meanings related to system operation and safety.
Outlines critical safety measures to prevent injury or death during operation and installation.
Details recommended water quality parameters for optimal UV system performance.
Details operation for basic VIQUA controllers, including lamp life and fault indicators.
Explains operation for Plus series VIQUA controllers, covering UV intensity and advanced features.
Addresses common system problems, their causes, and recommended solutions for effective operation.
Provides graphical data correlating flow rate with UV dose (fluence) for different models.
Lists technical specifications for standard Home and Professional VIQUA UV systems.
Details technical specifications for the VIQUA Plus series of Home and Professional UV systems.
Outlines specific warranty periods for UV chambers, electrical components, lamps, sleeves, and sensors.
