4
WARNING
Failure to comply with safety warnings and regulations may cause serious injury or death.
• Do not disassemble, repair, or modify the device
yourself.
It may cause fire, electric shock, or malfunction. For
internal inspection or repair, contact the Virtus Fleet Service
Representative or the sales headquarters.
• If any foreign matter enters the device, stop operation
immediately.
Contact the Virtus Fleet Service Representative or the sales
headquarters for repair.
• Do not store it in a high humid environment.
In case of failure by non-compliance with the instruction,
contact the Virtus Fleet Service Representative or the sales
headquarters.
• Make sure the power is turned off when attaching or
detaching a camera.
It may cause malfunction.
• Make sure the power is turned off when installing the
device.
It may cause an accident or electric shock when installing
the device.
• Do not install the device where it can interfere with the
driver’s vision.
It may cause an accident.
• Do not operate the device when any malfunction is
found in the device.
• If the device is used out of the optimal temperature
range (-20 to 60 °C), the device performance may
decrease or it may cause malfunction.
• Avoid exposing the device to high temperature such as
microwave ovens, stoves, or hair driers.
It can cause explosion or malfunction when overheated.
To Next Page
Loading...