57
]
Updating the firmware
»
Update the firmware in three different methods:
1. Manual update: After SD card format (with the viewer), insert the firmware file to the SD card, then insert
SDcard into the device. If the device does not reboot automatically, press the R pinhole on the device to
reboot the device.
2. Manual server update: After selecting the device from the server, click the firmware update button to
proceed with update.
3. Automatic setting update: When the auto firmware update is set on from the setting menu, automatic
update is run when the device is rebooted.
• Firmware format : MS_T7_updater.bin
• Firmware capacity : Approx. 30 MB
• Firmware checking : Can be checked from the user webpage or from the viewer.
To Next Page
Loading...